Fujitsu SPARC T5440 Instrukcja Użytkownika Strona 102

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 212
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 101
80 SPARC Enterprise T5440 Server Service Manual June 2011
4. Close the latch to lock the drive in place.
5. At the Solaris prompt, type the cfgadm -al command to list all drives in the
device tree, including any drives that are not configured. Type:
This command should help you identify the Ap_id for the hard drive you
installed. For an output example refer to EXAMPLE: Sample Ap_id Output on
page 81.
6. Type the cfgadm -c configure command to configure the disk.
For example, type:
where c0::sd1 is the disk that you are trying to configure.
7. Wait until the blue Ready-to-Remove LED is no longer lit on the drive that you
installed.
8. At the Solaris prompt, type the cfgadm -al command to list all drives in the
device tree, including any drives that are not configured. Type:
This command should identify the Ap_id for the hard drive that you installed.
The drive you installed should be is configured.
# cfgadm -al
# cfgadm -c configure c0::sd1
# cfgadm -al
Przeglądanie stron 101
1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 211 212

Komentarze do niniejszej Instrukcji

Brak uwag