Fujitsu MAU3036NC/NP Instrukcja Użytkownika Pobierz pdf (Strona 64)

4-14 C141-E205

in 1

in 34

Pin 68

in 35

.00m

in A1

in A2

Pin 1

2.54mm

5.08mm

.30mm

.00mm

5.08mm

1.27mm

0.40mm

0.635mm

.40mm

.00mm

Figure 4.16 68-pin type 16-bit SCSI interface connector

b. Power supply connector

Figure 4.17 shows the shape and the terminal arrangement of the output connector of DC

power supply.

4 3 2 1

Figure 4.17 Power supply connector (68-pin type 16-bit SCSI)

(3) SG terminal

The IDD is not provided with an SG terminal (fasten tab) for DC grounding. Therefore, when

connecting SG and FG in the system, use the +5 VDC RETURN (ground) inside the power supply

connector as the SG on the power supply side.

(4) Connector for external operator panel

• Connector for 16-bit SCSI external operator panel

CN1 provides connector for the external operator panel other than the SCSI bus as shown in

Figure 4.18. Also, a connector for the external operator panel are provided on the IDD as

shown in Figure 4.19. This allows connection of an external LED on the front panel, and an

SCSI ID setting switch. For the recommended circuit of the external operator panel, see

Subsection 4.3.4.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 129 130

Brak uwag

Fujitsu MAU3036NC/NP Instrukcja Użytkownika Strona 64